Bits for Torque Screwdriver

According to screw shape and specification, the screwdriver bit can be divided into hexagonal screwdriver bit and TORX® TX screwdriver bit. Hex screwdriver bits can be tighten Baoje toolholders, TORX® TX screwdriver bits are widely used in CNC inserts.

When using a screwdriver bit, you need to pay attention to that smaller screwdriver bits and screws are not suitable for torque adapters with large torque values, because too large torque values can easily damage the screwdriver bit and screw.

The service life of the screwdriver bit will be affected by the operater tightening habits. If the angle of applied force is incorrect or the tightening method is incorrect, the screwdriver bit is likely to be damaged.

Baoje systematic cutting tool provide 2 hex and 4 TX screwdriver bits.

Baoje toolholder screw specifications are M4 and M5, when M4 screw, use H2.0 screwdriver bit, when M5 screw, use H2.5 screwdriver bit (can click Baoje screwdriver bit model number to understand H2.0 and H2.5 hex screwdriver bits can apply to which Baoje toolholder).

The following is the introduction of 6 screwdriver bit item numbers:
1. BJ-BIT50-H2.0, this item can tighten the M4 screw, part of the screws on the Baoje toolholder is mainly M4 screw, please pay special attention to this item can withstand maximum torque of 2.0 Nm, use Torque adapter larger than 2.0 Nm will damage the screwdriver bit and the screw.

2. BJ-BIT50-H2.5, this item can tighten the M5 screw, part of the screws on the Baoje toolholder is mainly M5 screw.

3. BJ-BIT50-TX8, this item can tighten the TX8 screw, to be used with BJ-ADA-NO-3 torque adapter.

4. BJ-BIT50-TX9, this item can tighten the TX9 screw, to be used with BJ-ADA-NO-4 torque adapter.

5. BJ-BIT50-TX10, this item can tighten the TX10 screw, to be used with BJ-ADA-NO-5 torque adapter.

6. BJ-BIT50-TX15, this item can tighten the TX15 screw, to be used with BJ-ADA-NO-6 and BJ-ADA-NO-8 torque adapters.

Baoje provide 6 kinds of screwdriver bits. In addition to being able to tighten Baoje cutting tools, they can also tighten the CNC cutting inserts.