Threading Tool type i659-4P11

Home»Threading Tool (i)»Threading Tool type i659-4P11

Threading Tool type i659-4P11

Tool type: Threading Tool | Thread pitch (P): 1.5 | Ø Shaft (d): 6mm | Length cutting edge (l1): 19mm | Coating: TiN | Chip breaker: flat | Position of the clamping surface: 0° | Cutting Edge Ø (F): 5.9mm | Cutting width (W): 0.11mm | Clearance (H): 1.3mm | Max. Turning length (xF): 4xF | Flank angle (A): 60° |
► 3~7 days delivery time

SKU: i659-4P11 Category:

Description

Specifications

Tool no. i659-4P11

Feed Fz and cutting speed Vc

P1 Steel < 500 N/mm² 0.03-0.08 mm/min⁻¹
60-120 m/min
P2 Steel 500-700 N/mm² 0.03-0.08 mm/min⁻¹
60-100 m/min
P3 Steel 600-800 N/mm² 0.03-0.08 mm/min⁻¹
70-120 m/min
M2 Stainless steel < 750 N/mm² 0.03-0.08 mm/min⁻¹
50-80 m/min
M3 Stainless steel < 850 N/mm² 0.03-0.08 mm/min⁻¹
50-80 m/min
M4 Stainless steel < 950 N/mm² 0.03-0.08 mm/min⁻¹
50-80 m/min
N1 Aluminium alloys ≤ 12% Si 0.03-0.08 mm/min⁻¹
100-150 m/min
N2 Aluminium alloys > 12% Si 0.03-0.08 mm/min⁻¹
100-150 m/min
N4 Bronze and brass 0.03-0.08 mm/min⁻¹
100-150 m/min
H1 Hardened steel 35-45 HRC 0.03-0.08 mm/min⁻¹
50-80 m/min
H3 Hardened steel 52-62 HRC 0.03-0.08 mm/min⁻¹
50-80 m/min

Technical data

Tool type Threading Tool
Thread pitch (P) 1.5
Ø Shaft (d) 6mm
Length cutting edge (l1) 19mm
Coating TiN
Chip breaker flat
Position of the clamping surface
Cutting Edge Ø (F) 5.9mm
Offset from tool center (FC) 2.9mm
Lenght (Y) 6mm
Cutting width (W) 0.11mm
Clearance (H) 1.3mm
Max. Turning length (xF) 4xF
Flank angle (A) 60°

Videos

Title

Go to Top