Threading Tool type i545-4V10

Home»Threading Tool (i)»Threading Tool type i545-4V10

Threading Tool type i545-4V10

Tool type: Threading Tool | Thread pitch (P): 1.25 | Ø Shaft (d): 5mm | Length cutting edge (l1): 16mm | Coating: Uncoated | Chip breaker: V breaker groove | Position of the clamping surface: 0° | Cutting Edge Ø (F): 4.5mm | Cutting width (W): 0.07mm | Clearance (H): 1.1mm | Max. Turning length (xF): 4xF | Flank angle (A): 60° |
► 3~7 days delivery time

SKU: i545-4V10 Category:

Description

Specifications

Tool no. i545-4V10

Feed Fz and cutting speed Vc

P1 Steel < 500 N/mm² 0.03-0.08 mm/min⁻¹
60-120 m/min
P2 Steel 500-700 N/mm² 0.03-0.08 mm/min⁻¹
60-100 m/min
P3 Steel 600-800 N/mm² 0.03-0.08 mm/min⁻¹
70-120 m/min
M2 Stainless steel < 750 N/mm² 0.03-0.08 mm/min⁻¹
50-80 m/min
M3 Stainless steel < 850 N/mm² 0.03-0.08 mm/min⁻¹
50-80 m/min
M4 Stainless steel < 950 N/mm² 0.03-0.08 mm/min⁻¹
50-80 m/min
N1 Aluminium alloys ≤ 12% Si 0.03-0.08 mm/min⁻¹
100-150 m/min
N2 Aluminium alloys > 12% Si 0.03-0.08 mm/min⁻¹
100-150 m/min
N4 Bronze and brass 0.03-0.08 mm/min⁻¹
100-150 m/min
H1 Hardened steel 35-45 HRC 0.03-0.08 mm/min⁻¹
50-80 m/min
H3 Hardened steel 52-62 HRC 0.03-0.08 mm/min⁻¹
50-80 m/min

Technical data

Tool type Threading Tool
Thread pitch (P) 1.25
Ø Shaft (d) 5mm
Length cutting edge (l1) 16mm
Coating Uncoated
Chip breaker V breaker groove
Position of the clamping surface
Cutting Edge Ø (F) 4.5mm
Offset from tool center (FC) 2.4mm
Lenght (Y) 5mm
Cutting width (W) 0.07mm
Clearance (H) 1.1mm
Max. Turning length (xF) 4xF
Flank angle (A) 60°

Videos

Title

Go to Top