Grooving Tool type G307508-3V10

Home»Grooving Tool (G)»Grooving Tool type G307508-3V10

Grooving Tool type G307508-3V10

Tool type: Grooving Tool | Ø Shaft (d): 3mm | Length cutting edge (l1): 8mm | Corner chamfer (C): 0.04mm x 45° | Coating: Uncoated | Chip breaker: V breaker groove | Position of the clamping surface: 0° | Min. bore Ø: 3.2mm | Cutting Edge Ø (F): 2.9mm | Cutting width (W): 0.75mm | Clearance (H): 1.0mm | Max. Turning length (xF): 3xF | Grooving depth (S): 0.8mm |
► 3~7 days delivery time

SKU: G307508-3V10 Category:

Description

Specifications

Tool no. G307508-3V10

Feed Fz and cutting speed Vc

P1 Steel < 500 N/mm² 0.03-0.08 mm/min⁻¹
60-120 m/min
P2 Steel 500-700 N/mm² 0.03-0.08 mm/min⁻¹
60-100 m/min
P3 Steel 600-800 N/mm² 0.03-0.08 mm/min⁻¹
70-120 m/min
M2 Stainless steel < 750 N/mm² 0.03-0.08 mm/min⁻¹
50-80 m/min
M3 Stainless steel < 850 N/mm² 0.03-0.08 mm/min⁻¹
50-80 m/min
M4 Stainless steel < 950 N/mm² 0.03-0.08 mm/min⁻¹
50-80 m/min
N1 Aluminium alloys ≤ 12% Si 0.03-0.08 mm/min⁻¹
100-150 m/min
N2 Aluminium alloys > 12% Si 0.03-0.08 mm/min⁻¹
100-150 m/min
N4 Bronze and brass 0.03-0.08 mm/min⁻¹
100-150 m/min
H1 Hardened steel 35-45 HRC 0.03-0.08 mm/min⁻¹
50-80 m/min
H3 Hardened steel 52-62 HRC 0.03-0.08 mm/min⁻¹
50-80 m/min

Technical data

Tool type Grooving Tool
Ø Shaft (d) 3mm
Length cutting edge (l1) 8mm
Corner chamfer (C) 0.04mm x 45°
Coating Uncoated
Chip breaker V breaker groove
Position of the clamping surface
Min. bore Ø 3.2mm
Cutting Edge Ø (F) 2.9mm
Offset from tool center (FC) 1.4mm
Lenght (Y) 3mm
Cutting width (W) 0.75mm
Clearance (H) 1.0mm
Max. Turning length (xF) 3xF
Grooving depth (S) 0.8mm

Videos

Title

Go to Top