47° Turning Tool type U318-5V11

»»47° Turning Tool type U318-5V11

47° Turning Tool type U318-5V11

Tool type: 47° Turning Tool | Ø Shaft (d): 3mm | Length cutting edge (l1): 10mm | Length effective (l2): 13mm | Corner radius (R): 0.05mm | Coating: TiN | Point angles: 47° | Chip breaker: V breaker groove | Position of the clamping surface: 0° | Min. bore Ø: 2mm | Cutting Edge Ø (F): 1.8mm | Cutting width (W): 0.3mm | Clearance (H): 0.5mm | Max. Turning length (xF): 5xF |
► 3~7 days delivery time

SKU: U318-5V11 Category:

Description

Specifications

Tool no.U318-5V11

Feed Fz and cutting speed Vc

P1 Steel < 500 N/mm²0.03-0.08 mm/min⁻¹
60-120 m/min
P2 Steel 500-700 N/mm²0.03-0.08 mm/min⁻¹
60-100 m/min
P3 Steel 600-800 N/mm²0.03-0.08 mm/min⁻¹
70-120 m/min
M2 Stainless steel < 750 N/mm²0.03-0.08 mm/min⁻¹
50-80 m/min
M3 Stainless steel < 850 N/mm²0.03-0.08 mm/min⁻¹
50-80 m/min
M4 Stainless steel < 950 N/mm²0.03-0.08 mm/min⁻¹
50-80 m/min
N1 Aluminium alloys ≤ 12% Si0.03-0.08 mm/min⁻¹
100-150 m/min
N2 Aluminium alloys > 12% Si0.03-0.08 mm/min⁻¹
100-150 m/min
N4 Bronze and brass0.03-0.08 mm/min⁻¹
100-150 m/min
H1 Hardened steel 35-45 HRC0.03-0.08 mm/min⁻¹
50-80 m/min
H3 Hardened steel 52-62 HRC0.03-0.08 mm/min⁻¹
50-80 m/min

Technical data

Tool type47° Turning Tool
Ø Shaft (d)3mm
Length cutting edge (l1)10mm
Length effective (l2)13mm
Corner radius (R)0.05mm
CoatingTiN
Point angles47°
Chip breakerV breaker groove
Position of the clamping surface
Min. bore Ø2mm
Cutting Edge Ø (F)1.8mm
Offset from tool center (FC)1.4mm
Lenght (Y)3mm
Cutting width (W)0.3mm
Clearance (H)0.5mm
Max. Turning length (xF)5xF

Videos