Tool type: 10° Turning Tool | Ø Shaft (d): 5mm | Length cutting edge (l1): 14mm | Corner radius (R): 0.1mm | Coating: TiN | Point angles: 10° | Chip breaker: V breaker groove | Position of the clamping surface: 0° | Min. bore Ø: 5.2mm | Cutting Edge Ø (F): 4.9mm | Max. Turning length (xF): 3xF |
► 3~7 days delivery time
10° Turning Tool type T549-3V11
Description
Specifications
Tool no. | T549-3V11 |
Feed Fz and cutting speed Vc
P1 Steel < 500 N/mm² | 0.03-0.08 mm/min⁻¹ 60-120 m/min |
P2 Steel 500-700 N/mm² | 0.03-0.08 mm/min⁻¹ 60-100 m/min |
P3 Steel 600-800 N/mm² | 0.03-0.08 mm/min⁻¹ 70-120 m/min |
M2 Stainless steel < 750 N/mm² | 0.03-0.08 mm/min⁻¹ 50-80 m/min |
M3 Stainless steel < 850 N/mm² | 0.03-0.08 mm/min⁻¹ 50-80 m/min |
M4 Stainless steel < 950 N/mm² | 0.03-0.08 mm/min⁻¹ 50-80 m/min |
N1 Aluminium alloys ≤ 12% Si | 0.03-0.08 mm/min⁻¹ 100-150 m/min |
N2 Aluminium alloys > 12% Si | 0.03-0.08 mm/min⁻¹ 100-150 m/min |
N4 Bronze and brass | 0.03-0.08 mm/min⁻¹ 100-150 m/min |
H1 Hardened steel 35-45 HRC | 0.03-0.08 mm/min⁻¹ 50-80 m/min |
H3 Hardened steel 52-62 HRC | 0.03-0.08 mm/min⁻¹ 50-80 m/min |
Technical data
Tool type | 10° Turning Tool |
Ø Shaft (d) | 5mm |
Length cutting edge (l1) | 14mm |
Length effective (l2) | – |
Corner radius (R) | 0.1mm |
Coating | TiN |
Point angles | 10° |
Chip breaker | V breaker groove |
Min. bore Ø | 5.2mm |
Cutting Edge Ø (F) | 4.9mm |
Offset from tool center (FC) | 2.4mm |
Lenght (Y) | 3mm |
Max. Turning length (xF) | 3xF |