10° Turning Tool type T329-6V13

Home»10 degree Turning Tool (T)»10° Turning Tool type T329-6V13

10° Turning Tool type T329-6V13

Tool type: 10° Turning Tool | Ø Shaft (d): 3mm | Length cutting edge (l1): 17mm | Corner radius (R): 0.1mm | Coating: S-Fire (TiAlN) | Point angles: 10° | Chip breaker: V breaker groove | Position of the clamping surface: 0° | Min. bore Ø: 3.2mm | Cutting Edge Ø (F): 2.9mm | Max. Turning length (xF): 6xF |
► 3~7 days delivery time

SKU: T329-6V13 Category:

Description

Specifications

Tool no. T329-6V13

Feed Fz and cutting speed Vc

P1 Steel < 500 N/mm² 0.03-0.08 mm/min⁻¹
60-120 m/min
P2 Steel 500-700 N/mm² 0.03-0.08 mm/min⁻¹
60-100 m/min
P3 Steel 600-800 N/mm² 0.03-0.08 mm/min⁻¹
70-120 m/min
M2 Stainless steel < 750 N/mm² 0.03-0.08 mm/min⁻¹
50-80 m/min
M3 Stainless steel < 850 N/mm² 0.03-0.08 mm/min⁻¹
50-80 m/min
M4 Stainless steel < 950 N/mm² 0.03-0.08 mm/min⁻¹
50-80 m/min
N1 Aluminium alloys ≤ 12% Si 0.03-0.08 mm/min⁻¹
100-150 m/min
N2 Aluminium alloys > 12% Si 0.03-0.08 mm/min⁻¹
100-150 m/min
N4 Bronze and brass 0.03-0.08 mm/min⁻¹
100-150 m/min
H1 Hardened steel 35-45 HRC 0.03-0.08 mm/min⁻¹
50-80 m/min
H3 Hardened steel 52-62 HRC 0.03-0.08 mm/min⁻¹
50-80 m/min

Technical data

Tool type 10° Turning Tool
Ø Shaft (d) 3mm
Length cutting edge (l1) 17mm
Length effective (l2)
Corner radius (R) 0.1mm
Coating S-Fire (TiAlN)
Point angles 10°
Chip breaker V breaker groove
Min. bore Ø 3.2mm
Cutting Edge Ø (F) 2.9mm
Offset from tool center (FC) 1.4mm
Lenght (Y) 3mm
Max. Turning length (xF) 6xF

Videos

Title

Go to Top